Uneven Baking or Temperature Off
Food burning on top while raw inside indicates a failed bake or broil element, bad temperature sensor, or relay board fault.
Appliance Service Specialist
Oven, Range, Cooktop & Range Hood Repair
An oven that bakes unevenly, a range burner that won't ignite, or a cooktop display showing error codes disrupts meal preparation. Appliance Experts 365 repairs freestanding ranges, wall ovens, cooktops, and slide-in ranges across Seattle, Bellevue, Tacoma, and the Puget Sound.
We service gas, electric, and induction heating systems, including luxury high-performance ranges from Wolf, Thermador, Viking, Miele, Dacor, Monogram, JennAir, and Bertazzoni.
- Licensed & Insured
- EPA Section 608 Certified
- 10+ years Experience
- Same-Day Service Available
Signs you need this repair
Common Oven & Range Repair Warning Signs
If any of these sound familiar, it's time to have a technician take a look.
Gas Burner Clicking or Not Igniting
A burner that clicks continuously or won't light points to a dirty spark igniter, weak spark module, or clogged burner port.
Error Codes on Control Panel
Codes such as EC01, E010, F10, F30, F3 E1, or C-20 signal sensor, door latch, or control board failures.
Oven Door Locked / Won't Open
A door stuck after a self-clean cycle means a jammed motorized door lock latch or tripped high-limit thermal switch.
Electric Element Not Heating
A radiant element or solid burner coil that stays cold points to a burnt element, infinite switch failure, or broken wire.
Induction Cooktop Error / Pan Not Sensing
Flashing pan indicators or error codes on induction units indicate an inverter board, fan, or zone coil sensor fault.
How We Diagnose Oven & Range Problems
We test bake/broil heating element resistance, temperature probe thermistor curve values, gas igniter amperage draw, and electronic control relays before replacing parts.
High-performance commercial-style ranges (Wolf, Thermador, Viking, Capital, BlueStar) feature heavy-duty gas valves, dual-stacked burners, and dual-convection blowers. Our technicians carry specialized diagnostic tools for high-output gas and dual-fuel systems.
What's Included in Every Service Visit
You'll get an itemized written quote prior to repair work. Diagnostic fees credit toward your repair, and all work is backed by our parts-and-labor warranty.
Brands We Service
We repair ranges, ovens, and cooktops from Wolf, Thermador, Viking, Miele, Dacor, Monogram, JennAir, Bertazzoni, Gaggenau, Bosch, GE, KitchenAid, Frigidaire, LG, and Samsung.
Diagnostic Reference
Common Oven & Range Repair Error Codes
Select a brand or search your display code below. Includes error codes for both standard and high-end premium built-in appliances.
| Error Code | Brand | Appliance | What It Means | What We Do |
|---|---|---|---|---|
| EC01 |
Wolf
Premium
|
Dual Fuel / Electric Oven | Oven cavity temperature sensor thermistor circuit open or shorted. | We measure sensor resistance at the control board harness and replace the thermistor assembly. |
| EC06 |
Wolf
Premium
|
Wall Oven / Range | Oven cavity temperature exceeded 600°F (runaway heat safety trip). | We test bake/broil control relays, high-limit thermal switch, and control board power output. |
| EC12 |
Wolf
Premium
|
Dual Convection Oven | Convection fan blower motor speed error. | We inspect convection fan motor bearings, capacitor, and control board triac output. |
| EC24 |
Wolf
Premium
|
Oven | Motorized door lock assembly failure during self-clean cycle. | We test door lock microswitches, motor coil, and replace latch mechanism if jammed. |
| EC30 |
Wolf
Premium
|
Dual Fuel Range | Relay board microprocessor communication fault. | We inspect communication bus cables and replace relay board. |
| E010 |
Thermador
Premium
|
Wall Oven / Professional Range | Electronic control board microprocessor communication mismatch. | We inspect power module wiring connections and replace main electronic control board. |
| E011 |
Thermador
Premium
|
Oven / Range | Touch panel keypad button stuck continuously for over 60 seconds. | We test glass capacitive touch ribbon cable and replace glass control interface if shorted. |
| E024 |
Thermador
Premium
|
Oven | Door latch lock mechanism failed during self-clean cycle. | We test door lock motor microswitches and reset safety thermal limit. |
| E030 |
Thermador
Premium
|
Built-in Oven | Oven cavity PT100 temperature sensor reading out of calibration. | We replace precision temperature probe assembly and recalibrate control. |
| E106 |
Thermador
Premium
|
Wall Oven | Cooling fan blower motor speed error. | We replace upper cooling fan motor. |
| F1 |
Viking
Premium
|
Freestanding Range / Oven | Control board microprocessor or EEPROM memory fault. | We inspect power module board and replace main electronic control unit. |
| F3 |
Viking
Premium
|
Oven | Oven cavity temperature sensor circuit open. | We test sensor wiring harness continuity and replace temperature sensor. |
| F7 |
Viking
Premium
|
Touch Control Range | Touch control keypad membrane switch shorted. | We replace touch control panel assembly. |
| F9 |
Viking
Premium
|
Range | Door lock safety system circuit failure. | We replace door lock motor switch module. |
| F10 |
Miele
Premium
|
Built-in Oven | Temperature sensor circuit resistance out of spec. | We inspect sensor wiring harness and replace thermistor probe. |
| F32 |
Miele
Premium
|
Pyrolytic Oven | Motorized door latch lock failure prior to Pyrolytic clean cycle. | We replace motorized door lock assembly. |
| F55 |
Miele
Premium
|
Oven | Safety operating time limit cutoff activated (heating over 12 hours). | We inspect thermostat operation and clear safety fault memory. |
| F1 |
Dacor
Premium
|
Wall Oven | Master electronic control board relay fault. | We replace main power relay board assembly. |
| F9 |
Monogram
Premium
|
Professional Oven | Motorized door lock switch circuit failure. | We replace motorized latch motor assembly. |
| F1 E1 |
JennAir
Premium
|
Range / Oven | Control board safety relay welded shut or microcontroller error. | We replace primary control board. |
| Er 1 |
Bertazzoni
Premium
|
Range | Oven cavity temperature sensor thermistor fault. | We calibrate or replace oven thermistor probe. |
| F10 |
Frigidaire
|
Oven / Range | Runaway oven temperature detected (heating above safety threshold). | We replace bake/broil relay board and temperature sensor. |
| F30 |
Frigidaire
|
Oven | Oven temperature sensor circuit open. | We replace temperature sensor probe harness. |
| F31 |
GE
|
Range / Oven | Oven temperature sensor open circuit. | We test thermistor resistance and replace sensor. |
| F3 E1 |
KitchenAid / Whirlpool
|
Oven | Oven temperature sensor circuit open or disconnected. | We replace temperature sensor probe. |
| C-20 |
Samsung
|
Range / Oven | Oven temperature sensor circuit fault. | We replace temperature thermistor and test control harness. |
No matching error codes found
Don't worry — our technicians diagnose all custom and unlisted error codes on-site. Call us at +1 (206) 427-7323 for immediate diagnostic assistance.
* Error codes vary by model generation and production year. Our licensed technicians perform full diagnostic verification in person before replacing any parts.
Got Questions?
Oven & Range Repair FAQs
Why is my oven baking unevenly or burning food on top?
Uneven baking usually means either the lower bake element or upper broil element has failed, or that the temperature sensor is giving inaccurate readings to the control board. We test both elements and the sensor to pinpoint the exact failure.
Why is my gas range surface burner clicking continuously?
Continuous clicking happens when the spark igniter detects moisture, food grease, or a misaligned burner cap, or when the spark module switch is shorted. Cleaning the igniter tip or replacing the spark switch stops the clicking.
How do I unlock an oven door stuck after self-clean?
Self-cleaning heats the oven above 800°F and locks the door with a motorized latch. If the high-limit thermal fuse trips or the lock motor jams, the door stays locked. We test the thermal fuse and lock motor to safely release the latch.
What causes an electric bake element to spark, glow bright orange, or break in half?
An electric heating element sparks or breaks when the outer sheath degrades over time and short-circuits to the cabinet chassis. We replace burnt elements and test board relays.
Why is my gas oven taking a long time to ignite or preheat?
Slow gas ignition is caused by a weak silicon carbide igniter coil. As igniters age, they draw insufficient amperage to open the safety gas valve. Replacing the igniter restores fast 10-minute preheating.
Can you repair induction cooktops and dual-fuel commercial ranges (Wolf, Thermador, Viking)?
Yes. Our technicians service dual-fuel ranges, high-BTU gas burners, and induction glass cooktops, including induction power inverter boards and cooling fans.
What causes error codes like F10, E011, or EC01 on an oven control panel?
These error codes indicate runaway cavity temperatures, stuck touch panel keys, or open temperature thermistor circuits. We run diagnostic diagnostics to replace the specific faulty board or sensor.
Why is the range hood fan or light not operating properly?
Range hood issues usually trace back to a burnt blower motor, shorted speed selector switch, or blown transformer on high-volume exhaust hoods.
Is it safe to use an oven if I smell a faint odor of gas during preheating?
A brief 2-second smell during gas burner ignition can be normal, but a persistent gas odor means a leaking gas valve or delayed igniter. Shut off the gas valve and call for inspection immediately.
How much does oven and range repair cost?
Repair costs depend on the appliance type (gas, electric, induction) and parts needed. We provide an itemized written quote after diagnosis, and the diagnostic fee is credited toward approved repairs.
More Services
Other Appliance Repair We Offer
Fast Response
Request Your Appliance Repair
Fill out the form below and a licensed technician will call or text you within 1 business hour. Or call now: +1 (206) 427‑7323.