Appliances Repair Pros

5 Common Refrigerator Problems and How to Fix Them

Refrigerators are the unsung heroes of kitchens past, present, and future — diligently cold-storing your food until dinner is prepared. However, just like any appliance, they can experience problems as well. As a Tacoma homeowner, knowing how to remedy some of the most common refrigerator issues can save you time and money, but even more importantly: your perishable food! After reading this guide, you should be able to fix five of the most regular fridge issues easily.

1. Refrigerator Not Cooling

Let us admit one of the scariest issues that come up, your fridge is not cooling properly. Ignoring this could result in spoiled food or expensive fixes. This might be because the condenser coils are dirty, and they need a clean-out, or it could be that the evaporator fan is not working correctly and you may need to have them replaced or fixed; it could even be that your thermostat is fucked.

Solution

Inspect the condenser coils, either located at the rear or beneath your refrigerator. If your fridge runs most of the day or has collected a lot of grime, it will have difficulty cooling food correctly. Disconnect this device and vacuum or brush out those coils. If so, check the evaporator fan and thermostat. If you’re unsure of what awaits or the components seem to be damaged in any way, look up for a technician for appliance repair in Tacoma.

2. Strange Noises

Strange noises coming from your fridge? Refrigerators are not entirely silent, but specific noises such as buzzing, clicking or rattling could signal a problem. These anyways could indicate an evaporator fan motor problem, a condenser fan motor issue, or the compressor.

Solution

The first step is to determine what, specifically, you are hearing. If it is from the back, then the fan motor of the condenser might be blocked due to debris or dust. F); cut out the unit’s fan; turn off the fridge. In the case of a buzzing noise, make sure that your compressor is not cycling too frequently. If the fan is dirty or restarting it did not work, then you would want to contact a Tacoma appliance repair company so that they may come and correct the issue.

3. Water Leaks

Living in Tacoma, water leaks around or inside the fridge are common problems to have – especially with all of our humidity fluctuations! Usually, this issue occurs when there is a blockage or the defrost drain literally freezes over. A water filter or a water inlet valve not operating correctly could likewise bring about leaks.

Solution

How to fix a clogged defrost drain: unplug the fridge and find the drain hole (typically on the back panel inside or underneath) Open the blockage with hot water, considering pouring it over and through a turkey baster or tube cleaner. If you continue to experience water problems, examine the water filter and inlet valve. If either looks broken, it is a good idea to change the defective part. For difficult repairs, you should look for help to repair appliance experts from Appliance Repair Tacoma.

4. Ice Maker Not Working

When you open the freezer and find more water than ice, or worse — no ice at all, what are you supposed to do? It seems like a minor inconvenience at first until we hit summer here in Tacoma. The problem could be a blockage in the water line or a broken water inlet valve, but it might also relate to the ice-making assembly.

Solution

To start, check the water supply line to determine whether it is blocked or kinked. If this is not the case then check if one of your water inlet valve components has gone bad. If these parts are not replaced, the ice maker assembly may need to be serviced or replaced. If your ice maker is giving you a much more complex issue, then it would be wise to consult with one of the best home appliances repairing services so as not to face further issues.

5. Running the Refrigerator All the Time

And a fridge that is burning the midnight oil might not be running efficiently which in turn could cause higher energy bills and unnecessary strain on your appliance. This problem could stem from dirty condenser coils, faulty thermostats, or the wrong temperature settings.

Solution

This works by taking off the condenser coils, these will have a layer of dirt and grease from years if not cleaned one time, this can cause more work to your fridge then needed. Then, verify your temperature settings aren’t too low. The perfect temperature range for a refrigerator is 37°F to 40°F. If this does not stop the fridge from running constantly, you there could possibly be an issue with the thermostat or defrost timer that need to have an Appliance Repair Tacoma technician to resolve.

When to Call a Professional

Most fridge problems can be resolved using a DIY solution, whereas some often intricate issues demand for professional help. If you are not certain about a repair or it includes some kind of electrical components, call Appliance Repair Service.

Appliance Repair Tacoma services can be both quick as well as effective, and they ensure you get good results in no time with the shortest downtime your fridge has. A professional technician can pinpoint the problem of your fridge when it comes to an inefficient thermostat or a defrost drain that leaks.

Final Thoughts

If you own a refrigerator, it is likely that maintenance and repairs are something you will have to deal with sooner or later. When you stay on top of the problem and simply perform routine maintenance you may be able to add another couple weeks, months, or even years to your appliance without having to replace it for a significant amount of money. To avoid that doubt, simply pick up the phone and call your local appliance repair experts, always ready to help you.

Scroll to Top